Hi all,
Im from Brisbane.Australia and ride a '79 z650.
Had the bike since new, runs 3 spoke mags, gsx1100 swingarm, zrx rear shocks, nissan 4 pot brakes etc, etc.
Motor is a fuel injected 810 with a flowed head, andrews cams and gpz1100 throttle bodies.
http://youtube.com/watch?v=GDFTLjmo7ZE
Im from Brisbane.Australia and ride a '79 z650.
Had the bike since new, runs 3 spoke mags, gsx1100 swingarm, zrx rear shocks, nissan 4 pot brakes etc, etc.
Motor is a fuel injected 810 with a flowed head, andrews cams and gpz1100 throttle bodies.
http://youtube.com/watch?v=GDFTLjmo7ZE
Just stubborn enough to make it work with the help of some really great people
that I have met through the Megasquirt diy ecu forum.
, the rear end will be an Aprilia RSV1000 swing arm and a zx14 shock, Busa rear
rim, R1 front. Motor will have FI using zx636 TB's and a Megasquirt ecu and cop coils. Bodtwork will mostly be one off with the exception of the GPZ9 tank.
This will be the first fibreglass bodywork that I have made so the learning curve will be pretty steep.
there are a lot of parts that I will make up on my small combination lathe, take time but you get htere in the end
